3DPC.tech Launches New 3D Printing Nozzle Technology

3DPC.tech Launches New 3D Printing Nozzle Technology
4.3 (85.71%) 7 votes

3DPC.tech PRESS RELEASE

24 September 2018
FOR IMMEDIATE RELEASE
NANO Diamondized™ Nozzles for 3D Printing Launches at 3DPC.tech
Canton, Michigan

Nanodiamond Coated Nozzles for 3D Printing Launches at 3DPC.tech

3D Printing Club, through its website WWW.3DPC.TECH announces the launch of a line of Diamondized™ 3D Printing Nozzles enhanced with nanodiamond and polymer technologies.  The nanodiamond and polymer coatings are provided by Nano Materials and Processes, Inc. of Milford, Michigan. The interior of the nozzle is coated with a non-stick polymer to provide a smoother flow of filament and resist clogging. The tip is coated with nanodiamond crystals, the hardest known substance, that is wear resistant to maintain printing accuracy and provide nozzle life that is up to twenty (20) times longer than that of standard brass nozzles.

About the Coated Nozzles

Nano Materials and Processes, Inc. applies its nanodiamond coating processes to materials used in high stress and high-reliability applications. Historically these have been dies, stamps, bearings, and other critical components. Nanodiamonds are an ideal engineering material with the highest hardness available with a MOH=10 versus sapphire MOH=9. Diamondized™ nozzles also show a 38.7% advantage over tungsten nozzles. With the combination of non-stick internal coating and wear resistant tip, the nozzles can run kilograms of the most abrasive PTEG (e.g., carbon fiber PTEG) without failure.

The nozzles have undergone continuous use with an abrasive filament for more than one year without failure. The nozzles have successfully undergone continuous use with an abrasive filament for more than one year and are still in use.

Diamondized™ brass nozzles deliver the lowest cost per kilogram deposited of all available nozzle types with a cost of $0.011 per gram.

Two Year Guarantee

Diamondized™ nozzles are guaranteed for two-years including a minimum of 15 kg of non-filled PLA or 3 kg of 30% carbon PTEG.  Nozzles are tested by measuring the extrusion.

The warranty does not cover use of filaments with excessive regrind or contaminants, jamming of filament inside the heat brake, cooking of filament inside of the nozzle, heating the nozzle to greater than 350° Celsius, cleaning with oversize drills, or cleaning at excessive temperature. The recommended cleaning method is to wipe the outside with a soft cloth and the inside with cleaner filament.

Product Availability

Nano Materials and Processes, Inc. Diamondized™ 3D printer nozzles with nanodiamond coated tip and internal thin film polymer coating are available in the following configurations and output orifices. Custom orders are also available.

  • E3D V6, 0.2 mm (can substitute for V5 with adjustment)
  • E3D V6, 0.4 mm (can substitute for V5 with adjustment)
  • MK8, 0.2 mm
  • MK8, 0.4 mm
  • Volcano nozzle, 0.4 mm
  • Volcano nozzle 0.6 mm

Introductory Product Pricing

The introductory cost of Diamondized™ 3D Printer Nozzles, E3D or MK8:

  • One for $16.95
  • Two Nozzles $31.90, save $2.00
  • Three Nozzles $45.00, save $5.85
  • Bulk quantity pricing on request.

Shipping and applicable taxes are additional.

 

About 3DPC.tech         

3DPC.tech is the moderating host to 3D Printing Club, 3D Printing Club for Teachers and Schools, and 3D Print Laser and Milling plus many brand and model specific user groups.

 

Contact Information

For more information please visit: www.3DPC.tech
Sales: https://3dpc.tech/3dpc-sales/
Contact: Al Shuryan, Mobile: 734-751-2621, e-mail: alfredshuryan@3dpc.tech

 

3DPC.tech Diamondized™ 3D Printer Nozzles

 

 

 

 

 

 

 

 

 

Al Shuryan

Founder / Host / Moderator / Review Tech 3D Printing Club 3D Printing Club for Teachers and Schools 3D Print Laser and Milling www.3DPC.tech MODs4VETS alfredshuryan@3DPC.tech

One thought on “3DPC.tech Launches New 3D Printing Nozzle Technology

Comments are closed.